Frequently Asked Questions

What is PEX?

PEX is cross-linked polyethylene. Through one of several processes, links between polyethylene molecules are formed to create bridges (thus the term "cross-linked). This resulting material is more durable under temperature extremes, chemical attack, and better resists creep deformation, making PEX an excellent material for hot water and other applications.

How long has PEX been used?

PEX was developed in the 1960s. PEX tubing has been in use in many European countries for plumbing, radiant heating and snow melt applications since that time. PEX was introduced in the United States in the 1980s, and has seen significant growth in market demand and production.

What are recommended uses for PEX?

PEX 's flexibility and strength at temperatures ranging from below freezing up to 200 degrees Fahrenheit makes it an ideal piping material for hot and cold water plumbing systems, service lines, hydronic radiant heating systems, snow melting applications, ice rinks and refrigeration warehouses.

Why is PEX an excellent piping material for plumbing?

PEX is ideally suited for potable water plumbing applications. It is flexible, making it easy to install and service. PEX is able to withstand the high and low temperatures found in plumbing and heating applications, and is highly resistant to chemicals found in the plumbing environment.

Flexible systems are quieter than rigid piping. The smooth interior will not corrode which can affect other materials long term pipe flow characteristics. PEX is also very freeze- break resistant. PEX systems have fewer joints and are easier to install providing a lower cost installation over traditional plumbing materials.

How can I be sure that PEX is a safe product for plumbing?

PEX is manufactured and tested according to stringent national consensus standards: ASTM F 876, F 877, AWWA C904 and CSA B137.5. Both the product manufacturer and independent third party testing agencies conduct routine quality control and quality assurance evaluations to insure the product meets ASTM, ANSI/NSF International and CSA Standards. Compliance with the standards ensures the end user of safety and quality. Additionally, PEX is included in all of the major model plumbing codes used in the United States and Canada; NPC, UPC, IPC and NSPC, and approved by HUD for hot and cold potable water plumbing use.

Where is PEX approved for use?

PEX is an approved material in all the current model-plumbing codes; however, some jurisdictions using older versions of these codes may not have amended the code to include PEX tubing. Contact the local authority with jurisdiction over plumbing to verify the acceptance of PEX tubing for plumbing applications in your area.

Can PEX be used under the slab?

Yes. The flexibility of PEX allows it to be supplied in coils meaning installations under the slab can be made in a single, continuous length without the need for PEX fittings. PEX is not affected by concrete, (it is commonly encased in concrete for radiant floor heating). PEX, however, must be sleeved when penetrating a slab.

Can PEX be used for underground cold-water service applications?

Yes. Although the high temperature resistance of PEX makes it particularly suitable for hot and cold interior plumbing applications, it also makes an excellent underground water service piping. The new AWWA C904 standard also applies to PEX used in this application. PEX can be installed using the same PEX fittings recommended for copper tube sized SDR-9 polyethylene tubing.

Can PEX be used for aboveground outdoor applications?

No. PEX is currently designed for indoor and buried applications only and is not recommended for outdoor, aboveground use. Short exposures to sunlight during construction are permissible, but should not exceed the manufacturer’s recommendations. PEX should be stored under cover, shielded from direct sunlight or in the original packaging. In the future, PEX products rated for outdoor use may be developed.

Can PEX save me money?

Yes. PEX saves money in many ways. For the installer, PEX tubing is competitively priced. Installation of flexible systems is fast because of the easy handling of the tubing and PEX installation requires fewer directional PEX fittings. Since most plumbing problems occur at joints, fewer fittings also reduce the chances for leaks and callbacks, saving the installer even more time. The homeowner saves in the cost of the installed system, and can reduce utility costs in some layouts.

Home run or manifold plumbing systems utilizing PEX tubing can substantially reduce water and energy consumption in a home. The home-run concept provides dedicated direct lines from the manifold to the fixtures, reducing the amount of water that must be purged from the lines to get hot water at the fixture. Direct lines can be sized to the fixture requirements, further reducing the amount of time to wait for hot water. Faster hot water delivery reduces water waste and the amount of times the water heater must cycle to supply hot water.

What is the expected performance of PEX water distribution systems?

PEX is designed and tested to perform as well or better than any other material approved for hot and cold-water distribution systems. For indoor plumbing applications, PEX is expected to perform as long as copper, CPVC or any other approved plumbing distribution materials.

What joining systems are available?

There are several methods of connecting PEX, all of which involve mechanical PEX fittings. There are two approved standard specifications for PEX connections: ASTM F 1807 and ASTM F 1960. Both reference mechanical insert PEX fittings. The crimp fittings specified in ASTM F1807 are the most widely used. Other fitting systems, including insert and outside diameter compression fittings, are also available. PEX cannot be joined by solvent cement or heat fusion methods.

What manufacturing methods for PEX are available?

There are currently three methods for producing PEX tubing, the “Engle” or “Peroxide” (PEX-A) method, the “Silane” (PEX-B) method, and the “E-beam” (PEX-C) method . All three processes produce PEX tubing that exceed the minimum requirements of ASTM F 876 and are acceptable for potable water distribution applications. All PEX that has been tested and certified for potable applications carries the mark(s) of nationally recognized third-party certification agencies such as NSF, IAPMO, ICBO-ES, Warnock Hersey or UL.

How long can PEX be exposed to sunlight?

PEX tubing is not intended for outdoor applications and must be stored in a covered environment not exposed to direct sunlight. Refer to manufacturer’s instructions as to how long your pipe can have UV or sunlight exposure.

What are temperature limitations for PEX?

PEX tubing can be used up to 200° Fahrenheit for heating applications. For plumbing, PEX is limited to 180° F. Temperature limitations are always noted on the print line of the PEX tubing. PEX systems are tested to and can be used with standard T and P relief valves that operate at 210” F and 150 psi.

How are PEX systems tested for leaks?

PEX plumbing and radiant heating systems can be pressure tested using water to check for leaks. Follow manufacturer's instructions.

How soon after installation can you pressure test a PEX tubing installation?

Most PEX plumbing systems can be tested immediately after the installation is complete but follow manufacturer’s directions. There is no wait time for glue to dry or joint to cool off. Manufacturer's instructions should be followed in cold climates.

Where is PEX available?

PEX is available through most plumbing wholesale distributors throughout the United States and Canada. Many retail building supply outlets also supply PEX piping and PEX fittings. Piping and fittings are commonly available in 1/4" through 1" CTS (Copper Tube Size) with some manufacturers also supplying larger sizes up to 2." Because the wall-thickness is proportionate for each size, the pressure ratings are the same for all sizes.

What sizes, lengths and packaging options of PEX are available?

PEX is available in 1/4" through 1" CTS (Copper Tube Size) and is packaged in coils or 20' straight lengths. Some manufacturers tubing is color-coded for easy identification of hot and cold lines. Coil lengths generally run to a maximum of 1000' and are available in a variety of shorter lengths.

Is flexible PEX plumbed differently than rigid material plumbing systems?

Yes, the flexibility of PEX allows many directional changes to be made without fittings. PEX systems are sized in the same manner as copper or CPVC CTS plumbing systems. PEX piping is also used in high performance PEX manifold plumbing systems that takes advantage of the flexibility and cost effective.

What are manifold plumbing systems?

Manifold, parallel or home-run plumbing systems are much like a breaker box for the electrical system in the home. The manifold provides a common location from which all the plumbing fixtures are supplied. Some high-end PEX manifolds also feature fixture shut-off valves allowing the user to shut off the water to individual fixtures from one location. Others are semi-home run manifolds or termination manifolds, which may feed the plumbing requirements for a room or set of rooms and reduce the number of PEX fittings required in the plumbing system.

How are PEX systems sized?

PEX systems are sized just like other CTS plumbing materials such as copper or CPVC when used in a trunk-and-branch installation. PEX can be sized in manifold systems to meet the specific demands of each fixture, reducing water and energy waste in the home.

Is the thermal expansion/contraction of PEX a problem?

No. While PEX expands more than other plumbing materials, directional changes made with the PEX tubing and some slack in the tubing during installation accommodate the expansion and contraction of the system if properly installed.

Is PEX freeze-break resistant?

PEX piping is freeze damage resistant and can expand and contract as water freezes and thaws within the tubing. No tubing material is freeze-break proof, however, and PEX should be installed using the same locally-prescribed insulation requirements to prevent freezing of any plumbing system.

How do I thaw PEX lines?

When water freezes inside PEX tubing, it can be thawed using a hair dryer, warm wet rags or heat tape, taking care not to overheat the tubing beyond the maximum recommended temperature.

Can PEX be joined with solvent cement?

No. PEX cannot be joined with solvent cement, glues or heat fusion. PEX is installed using only mechanical fittings or compression fittings.